Double Bearing Mechanism. Two Anti Friction Bearings. Made of Hardened and Ground High Carbon Steel. Hardened on Tip 55 to 62 HRC Hardened Centre Shaft with 60? point. Special Steel Housing. Single Row Deep groove ball bearing and Taper Roller bearing to absorb combined radial and thrust loads
Three Portion is ground and Hardened
These Arbors are designed for applications where tampered and hardened arbors can't be used
Straight shank portion is soft which can be machined to adopt
Consists of Three anti-friction Steel bearings.
One needle roller bearing, one thrust ball bearing
and one deep groove ball bearing.
Well lubricated to protect against contaminants and coolants.
Hardened and Ground (60-62 HRC) Steel with 60Â° tip angle.
Run out within .0002" (.005 mm).
Bearings are Pre-loaded and pressed to avoid starting loads.
USAGE & ADVANTAGES :-
It also called a Live Center, it is essential for between enters turning. Essential For Shaft Turning
|Taper||Center Diam.||Max Load||Max RPM|
|MT-3||1.98 inch||925 lbs.||4000|
|MT-4||1.10 inch||1850 lbs.||3000|
|MT-5||1.61 inch||4400 lbs.||2500|
|Accessory||Suitable Model||Price (Rs.)|
Revolving Centre [2 Kg]
|BANKA 34, 35, 40||1500|
Revolving Centre [3 Kg]
|BANKA 43, 50, 60||2000|