Features :- Head stockgears hardened and ground. Gear boxgear hardened and ground.
Bedways hardened and ground up to 400 BHN.
TuriticalB anti- friction material on carriage ways.
Control panel & magnetic brake (
optionalavailable on request) Metricdial on cross slide ,Compound and tailstock semi universalgear box provides inch and metric thread without changing too many end trains gears.( universal gear boxoptional available on request )
Infinitely variable spindle speeds 30 1550 RPM in 18 H-L nos. spindle speeds.
Alloy steel Spindle molesting on taper roller bearings.
American LOO type and A2 type spindle nose available on request.
|Price||Rs. 3,69,000/-||Rs. 3,89,000/-||Rs. 4,09,000/-|
|1500 mm||2500 mm||3000 mm|
|9 Feet||12 Feet||14 Feet|
|300 mm||300 mm||300 mm|
Swing Over Bed
|600 mm||600 mm||600 mm|
|80 mm||80 mm||80 mm|
|30 - 1050 RPM||30 - 1050 RPM||30 - 1050 RPM|
Width Of Bed
|375 mm||375 mm||375 mm|
Swing Over Slide
|390 mm||390 mm||390 mm|
Cross Slide Travel
|325 mm||325 mm||325 mm|
Top Slide Travel
|150 mm||150 mm||150 mm|
|6 mm||6 mm||6 mm|
|Spindle Bore||100 mm|
|Spindle Mounting Bolt||M8-M16|
Even though we are largest all gear lathe manufacturer in
we have strongly India , with quality and never compromise with quality. Because no one manufacturer can survive without obsess quality in this neck maintain competition cot
There list of few testing instrument which are using for inspection
Straight edge meter
Spirit level precision
Hardness tester BHN
TachoMeter RPM MPM
Sound level decibel DB
Screw Thread special tester
Test Mandrel Long bar MT
Dial Indicator Micrometer
Bevel Protractor Vernier caliper
Thread , slip , Gauge plug,Ring,
Height plate , V block Gauge ,
Lead & profile test-
- Marketing :
We do not manufacture any parts on our
But we are purchasing from market as per our design, pattern and drawing standards floor ,
All assembly and subassembly are done on floor only
experienced and skilled team Well inspect machine and assembly. to to
Machine and assembly inspection reports are precisely followed
We strictly inspect all parts with its
material , and reference as per drawing tolerance
For case hardening process in pit type gas carburizing furnace with PID
Oxy- probe and controller , for recorder parts like there gears , Lock nut , Spindle The material used generally 20mnCr5 or SAE 8620 .
boring WMW Boring machine head stock
WMW planning machine for rough and finishing for the lathe machine bed
USA METSAN surface grinding machine for grinding lathe bed make
HMT type Harden plan for Hardening process
Banka :- 2, Samrat Industrial Area, Gondal Road, Rajkot, Gujarat, 360004, India