Banka Machine
Banka 50 Achiever Lathe Machine

Banka 50 Achiever Lathe Machine

Send Inquiry

Salient Features :-

    • Head stock gears hardened and ground.

    • Gear box gear hardened and ground.

    • Bedways hardened and ground up to 400 BHN.

    • Turitical B anti- friction material on carriage ways.

    • Control panel & magnetic brake (optional available on request)

    • Metric dial on cross slide , Compound and tailstock semi universal gear box provides inch and metric thread without changing too many end trains gears.( universal gear box optional available on request )

    • Infinitely variable spindle speeds 30 1550 RPM in 18 H-L nos. spindle speeds.

    • Alloy steel Spindle molesting on taper roller bearings.

    • American LOO type and A2 type spindle nose available on request.

 

Specification :-  

PriceRs. 2,69,000/-Rs. 2,79,000/-Rs. 2,99,000/-
A.B.C.
1000 mm1500 mm2500 mm
Bed Length
7 Feet9 Feet12 Feet
Centre Height
250 mm250 mm250 mm
Swing Over Bed
500 mm500 mm500 mm
Spindal Bore
53 mm53 mm53 mm
Spindle Speed
30 - 1550 RPM30 - 1550 RPM30 - 1550 RPM
Width Of Bed
325 mm325 mm325 mm
 Swing Over Slide
290 mm290 mm 290 mm  
Cross Slide Travel 
 260 mm 260 mm 260 mm 
Top Slide Travel
150 mm150 mm 150 mm 
Lead Screw 
6 mm 6 mm  6 mm  

 Weight (Kg.)

1300 1500 1800 

  

Quality :-
Even though we are largest all gear lathe manufacturer in India , we have strongly obsess with quality and never compromise with quality. Because no one manufacturer can survive without maintain quality in this neck cot competition  
 
There list of few testing instrument which are using for inspection
  • Straight edge meter

  • Spirit level precision

  • Hardness tester BHN Scalorow

  • TachoMeter RPM MPM

  • Thermometer temperature

  • Sound level decibel DB

  • Screw Thread special tester

  • Test Mandrel Long bar MT

  • Dial Indicator Micrometer

  • Bevel Protractor Vernier caliper

  • Thread , slip , plug,Ring, Gauge

  • Surface plate , Height Gauge , V block

  • Lead & profile test- stellenberg  

   

  System Making :-

  • We do not manufacture any parts on our floor , But we are purchasing from market as per our design, pattern and drawing standards

  • All assembly and subassembly are done on floor only

  • Well experienced and skilled team to to inspect machine and assembly.

  • Machine and assembly inspection reports are precisely followed

  • We strictly inspect all parts with its material , tolerance and reference as per drawing

  • For case hardening process in pit type gas carburizing furnace with PID controller , Oxy- probe and recorder for there parts like gears ,Lock nut ,Spindle . The material used generally 20mnCr5 or SAE 8620

  • For head stock boring WMW Boring machine

  • WMW planning machine for rough and finishing for the lathe machine bed

  • METSAN USA make surface grinding machine for grinding lathe bed

  • HMT type Harden plan for Hardening process