Banka 43 Gladiator Lathe Machine
Product Code : 04
Price And Quantity
- Unit of Measure :
Head stockgears hardened and ground. Gear boxgear hardened and ground.
Bedways hardened and ground up to 400 BHN.
TuriticalB anti- friction material on carriage ways.
Control panel & magnetic brake (
optionalavailable on request) Metricdial on cross slide ,Compound and tailstock semi universalgear box provides inch and metric thread without changing too many end trains gears.( universal gear boxoptional available on request )
Infinitely variable spindle speeds 30 1550 RPM in 18 H-L nos. spindle speeds.
Alloy steel Spindle molesting on taper roller bearings.
American LOO type and A2 type spindle nose available on request.
|Price||Rs. 1,94,000/-||Rs. 2,03,000/-|
|1000 mm||1500 mm|
|6 Feet||8 Feet|
|215 mm||215 mm|
Swing Over Bed
|430 mm||430 mm|
|52 mm||52 mm|
|40 - 1415 RPM||40 - 1415 RPM|
Width Of Bed
|305 mm||305 mm|
Swing Over Slide
|270 mm||270 mm|
Cross Slide Travel
|240 mm||240 mm|
Top Slide Travel
|125 mm||125 mm|
|6 mm||6 mm|
Even though we are largest all gear lathe manufacturer in
India , we have strongly obsesswith quality and never compromise with quality. Because no one manufacturer can survive without maintain quality in this neck cot competition
There list of few testing instrument which are using for inspection
Straight edge meter
Spirit level precision
Hardness tester BHN
TachoMeter RPM MPM
Sound level decibel DB
Screw Thread special tester
Test Mandrel Long bar MT
Dial Indicator Micrometer
Bevel Protractor Vernier caliper
Thread , slip , plug,Ring,Gauge
plate ,Height Gauge ,V block
Lead & profile test-
We do not manufacture any parts on our
floor ,But we are purchasing from market as per our design, pattern and drawing standards
All assembly and subassembly are done on floor only
Wellexperienced and skilled team to toinspect machine and assembly.
Machine and assembly inspection reports are precisely followed
We strictly inspect all parts with its
material , toleranceand reference as per drawing
For case hardening process in pit type gas carburizing furnace with PID
controller ,Oxy- probe and recorderfor thereparts like gears , Lock nut, The material used generally 20mnCr5 or SAE 8620 Spindle.
head stockboring WMW Boring machine
WMW planning machine for rough and finishing for the lathe machine bed
METSANUSA makesurface grinding machine for grinding lathe bed
HMT type Harden plan for Hardening process
Banka :- 2, Samrat Industrial Area, Gondal Road, Rajkot, Gujarat, 360004, India